callback onScrollEvent
Lipo Laser is a 100% non-invasive way to achieve inch loss and body contouring with no pain, no needles and no down time. 650nm enhances metabolism, 940nm go deep into the skin, the three wavelengths collaborate harmoniously to lose weight efficiently.
Lipo Laser emits low levels of laser energy, which creates a chemical signal in the fat cells to break down the stored triglycerides into free fatty acids and glycerol, and finally releasing them though cell membranes channels.
1. fat removal, decrease cellulite, weight loss and inch loss 2. Promote and accelerate the body's metabolism
3. skin tightening
4. detoxification
5. reduce fatigue
6. decrease appearance of stretch marks
7. feel better inside and out
8. Most importantly, non invasive short treatment process
Advantage
1. 650nm 780nm 808nm 940nm 980nm can work independently. They can also work together to save your time.
2. Japan MITSUBISHI imported high quality laser diodes. Energy output of each diode is 210mW. Biggest and most effective energy.
3. Two big pads are optional, 20 diodes, 28 diodes. The more diodes, the more energy, the more obvious inch loss.
4. More paddles can be provided so that you can do treatment on more clients at the same time.
5. There is unique air cooling system in each pad. This makes it easy for maintainance and prolongs lifespan of the machine.
6. IC card control system is optional. You can use it for your VIPs.
2. Japan MITSUBISHI imported high quality laser diodes. Energy output of each diode is 210mW. Biggest and most effective energy.
3. Two big pads are optional, 20 diodes, 28 diodes. The more diodes, the more energy, the more obvious inch loss.
4. More paddles can be provided so that you can do treatment on more clients at the same time.
5. There is unique air cooling system in each pad. This makes it easy for maintainance and prolongs lifespan of the machine.
6. IC card control system is optional. You can use it for your VIPs.
Interface
Parameters
| Wavelength | Laser diode 650nm & 780nm & 808nm & 940nm & 980nm |
| Output Energy | 209mw each diode laser light |
| Energy Lever | 1-15 |
| Pulse Time | 0.1-5s |
| Delay Time | 0-5s |
| Treatment Time | 1-60mins |
| Number of treatment paddles | 6,8,10,12,14 16 option |
| Number of diode laser | 4,28 each paddles option |
| Cooling system | Air cooling +wind cooling |
| Mode of Operation | Continues/time setting |
| Safety | On Board Diagnostics |
| Classification | Electrical Class I, Type B applied part |
| Dimensions | 52*40*30cm |
| Net Weight/Volume Weight | 11kg/32KG |
| Main Power output | 220v or 110v/50Hz-60Hz |
| Environmental Requirement | 50°F to 86°F Non-condensing Humidities Below 75%RH |
